Nano-thin piezoelectrics advance self-powered electronics

Nano-thin piezoelectrics advance self-powered electronics

A new type of ultra-efficient, nano-thin material could advance self-powered electronics, wearable technologies and even deliver pacemakers powered by heart beats.

The flexible and printable piezoelectric material, which can convert mechanical pressure into electrical energy, has been developed by an Australian research team led by RMIT University.

It is 100,000 times thinner than a human hair and 800% more efficient than other piezoelectrics based on similar non-toxic materials.

Importantly, researchers say it can be easily fabricated through a cost-effective and commercially scalable method, using liquid metals.

Lead researcher Dr Nasir Mahmood said the material, detailed in a new Materials Today study, was a major step towards realising the full potential of motion-driven, energy-harvesting devices.

“Until now, the best performing nano-thin piezoelectrics have been based on lead, a toxic material that is not suitable for biomedical use,” Mahmood, a Vice-Chancellor’s Research Fellow in the School of Engineering at RMIT, said.

“Our new material is based on non-toxic zinc oxide, which is also lightweight and compatible with silicon, making it easy to integrate into current electronics.

“It’s so efficient that all you need is a single 1.1 nanometre layer of our material to produce all the energy required for a fully self-powering nanodevice.”

Magnified image showing nano-thin sheets of the new type of ultra-efficient, flexible and printable piezoelectric material. Credit: RMIT University A magnified image showing nano-thin sheets of the new type of ultra-efficient, flexible and printable piezoelectric material.

The material’s potential biomedical applications include internal biosensors and self-powering biotechnologies, such as devices that convert blood pressure into a power source for pacemakers.

The nano-thin piezoelectrics could also be used in the development of smart oscillation sensors to detect faults in infrastructure like buildings and bridges, especially in earthquake-prone regions.

Examples of energy-harvesting technologies that could be delivered by integrating the new material include smart running shoes for charging mobile phones and smart footpaths that harness energy from footsteps.

Flexible nanogenerator: how the material is made

The new material is produced using a liquid metal printing approach, pioneered at RMIT.

Zinc oxide is first heated until it becomes liquid. This liquid metal, once exposed to oxygen, forms a nano-thin layer on top – like the skin on heated milk when it cools.

The metal is then rolled over a surface, to print off nano-thin sheets of the zinc oxide “skin”.

The innovative technique can rapidly produce large-scale sheets of the material and is compatible with any manufacturing process, including roll-to-roll (R2R) processing.

The researchers are now working on ultrasonic detectors for use in defence and infrastructure monitoring, as well as investigating the development of nanogenerators for harvesting mechanical energy.

“We’re keen to explore commercial collaboration opportunities and work with relevant industries to bring future power-generating nanodevices to market,” Mahmood said.

X-ray image showing a pacemaker and a patient's chest The new material could be used to develop devices that convert blood pressure into a power source for pacemakers.

The research is supported through funding from the Australian Research Council and the ARC Centre of Excellence in Future Low-Energy Electronics Technologies (FLEET).

The multi-disciplinary RMIT research team included Dr Hareem Khan, Dr Ali Zavabeti, Paul Atkin, Chenglong Xu, Associate Professor Jian Zhen Ou, Associate Professor Khashayar Khoshmanesh, Professor Yongxiang Li (School of Engineering) and Kevin Tran, Pramoda Kuppe, Dr Sherif Abdulkader Tawfik, Professor Michelle Spencer (School of Science).

The team acknowledges the support of the RMIT Micro Nano Research Facility (MNRF) and Microscopy and Microanalysis Facility (RMMF), CSIRO, the Multi-modal Australian Science Imaging and Visualisation Environment (MASSIVE), National Computational Infrastructure National Facility and the Pawsey Supercomputer Centre.

‘Maximum piezoelectricity in a few unit-cell thick planar ZnO – A liquid metal-based synthesis approach’, with collaborators from UNSW and Deakin University, is published in Materials Today (DOI: 10.1016/j.mattod.2020.11.016).

 

Story: Gosia Kaszubska

20 January 2021

Share

20 January 2021

Share

  • Research
  • Nano & Microtechnology
  • Engineering
  • Science and technology
  • Advanced Materials
Engage

Related News

news-aroma-intensity-1220px.jpg

Confinement may affect how we smell and feel about food

New research from RMIT University found confined and isolating environments changed the way people smelled and responded emotionally to certain food aromas.

Thumbnail_RA_Awards_2024_MEDIA_WALL.jpg

Aged care digital health tool recognised again on national stage

Australia’s first electronic screening and risk prediction tool for deterioration in aged care residents has won another national prize for its positive impact on health and safety.

Dr Biplob Pramanik shows the difference between a concrete block coated with his team’s anti-fatberg invention (left) compared to a block without any coating after undergoing an experiment that mimicked a sewer environment under extreme conditions to speed up the fatberg formation process. The white coloured blobs on the uncoated block are a mixture of fat, oil and grease (FOG) that have been deposited on the block. Credit: Will Wright, RMIT University

Anti-fatberg invention could help unclog city sewers

Engineers from RMIT University have invented a protective coating for concrete pipes that could help drastically reduce the formation of fatbergs in sewers.

news-carpet-concrete-1220px.jpg

Carpet fibres stop concrete cracking

Engineers in Australia have found a way to make stronger and crack-resistant concrete with scrap carpet fibres, rolling out the red carpet for sustainability in the construction sector.

Show more
aboriginal flag
torres strait flag

Acknowledgement of Country

RMIT University acknowledges the people of the Woi wurrung and Boon wurrung language groups of the eastern Kulin Nation on whose unceded lands we conduct the business of the University. RMIT University respectfully acknowledges their Ancestors and Elders, past and present. RMIT also acknowledges the Traditional Custodians and their Ancestors of the lands and waters across Australia where we conduct our business - Artwork 'Sentient' by Hollie Johnson, Gunaikurnai and Monero Ngarigo.

More information