Building cladding with recycled glass scores sky-high results in sustainability

Building cladding with recycled glass scores sky-high results in sustainability

Engineers have developed new fire-safe building claddings using recycled glass, creating a promising circular-economy solution to address a major waste stream.

The RMIT University team worked with materials technology company Livefield to produce the composite cladding, which they say is cheap, structurally robust and fire-resistant.

Lead researcher Associate Professor Dilan Robert said using recovered glass waste as an alternative cladding material could one day help reduce the amount of glass that goes to landfill. Globally, about 130 million tonnes of glass are produced each year, but only 21% of that is recycled glass.

The team’s non-combustible claddings use 83% recycled glass, along with relatively low amounts of plastic binders and fire-retardant additives.

Robert said their special blend of materials overcame the challenges with glass claddings, which were brittle and prone to fracture, as the plastic binders provided “improved toughness”.

“Experiments have proven that our claddings are fire-safe, water-resistant and cheap, and meet structural and environmentally sustainable requirements,” said Robert from the School of Engineering. 

Associate Professor Dilan Robert in front of the team's building cladding display at RMIT's Bundoora campus. Credit: RMIT University Associate Professor Dilan Robert in front of the team's building cladding display at RMIT's Bundoora campus. Credit: RMIT University

The technology has met the key compliance requirement of claddings for non-combustibility (AS1530.1) set by Standards Australia.

The technology, which is now being patented by Livefield, has been trialled for large-scale manufacturing capability.

Panels using the team’s technology are installed at RMIT’s Bundoora campus to demonstrate the technology’s feasibility as building claddings.

“Livefield is keen to upscale the manufacturing process of the recycled class composite cladding, with further research support from RMIT,” Robert said.

Building claddings play a key role in preventing the spread of fire, particularly in high-rise buildings. Image: Adobe Stock Building claddings play a key role in preventing the spread of fire, particularly in high-rise buildings. Image: Adobe Stock

A sustainable solution to a big waste challenge

Robert said millions of tonnes of reusable glass goes needlessly into landfill every year, and more glass could be recycled into products in the construction industry.

“Glass is one of the most recyclable materials in the world as it doesn’t lose its quality or purity, and it can be recycled for multiple uses across a wide range of industries,” he said.

“By using high amounts of recycled glass in building claddings, while ensuring they meet fire safety and other standards, we are helping to find a solution to the very real waste challenge.”

The research team of civil and material engineers was keen to work with industry around the world to find more ways of using recycled glass in products, Robert said 

“Reuse of glass that would otherwise go to landfill will bring environmental, economic and social benefits,” he said.

Globally, about 130 million tonnes of glass are produced each year, but only 21% of that is recycled glass. Credit: Adobe Stock Globally, about 130 million tonnes of glass are produced each year, but only 21% of that is recycled glass. Credit: Adobe Stock

Making city buildings fire-safe with the circular economy

Robert said testing of the new cladding materials for fire safety was an important focus of the research.

“Claddings play a key role in preventing the spread of fire, particularly in high-rise buildings,” Robert said.

“Some of the most catastrophic building fires, like the 2017 Grenfell tower fire in London that led to many deaths and injuries, have been attributed to the poor fire-prevention performance of cladding materials.”

These tragic events underscored the importance of understanding and designing fire-resistant cladding materials and systems for the building and construction sector, Robert said.

“Building fires can happen anywhere at any time and cannot be predicted. Therefore, fire safety requirements should be embedded in the design of buildings.”

Associate Professor Dilan Robert (left) and Associate Professor Everson Kandare with cladding samples made with recycled glass and other materials. Credit: RMIT University Associate Professor Dilan Robert (left) and Associate Professor Everson Kandare with cladding samples made with recycled glass and other materials. Credit: RMIT University

The power of collaboration

This successful project is a major collaboration involving RMIT, Cooperative Research Centres Projects grants, the ARC Industrial Transformation Research Hub for Transformation of Reclaimed Waste Resources to Engineered Materials and Solutions for a Circular Economy (TREMS), Sustainability Victoria and other industry support. Robert led the project with support from RMIT colleagues Dr Edwin Baez, Associate Professor Everson Kandare, Professor Sujeeva Setunge and Professor Kevin Zhang.

Innovation supported by peer-reviewed research

The RMIT team behind the new cladding technology has also recently published peer-reviewed research on fire-safe compliance of materials for building claddings and the use of recycled glass in construction products.

‘Fire compliance of construction materials for building claddings: A critical review’ is published in Construction and Building Materials (DOI: 10.1016/j.conbuildmat.2022.129582).

‘A new technology of transforming recycled glass waste to construction components’ is published in Construction and Building Materials (DOI: doi.org/10.1016/j.conbuildmat.2021.125539).


Story: Will Wright

09 March 2023

Share

Return to RMIT News
09 March 2023

Share

  • Sustainability
  • Science and technology
  • Research
  • STEM
  • Engineering
  • Property & Construction
Engage

Related News

news-spongy-water-1220px.jpg

Smart spongy device captures water from thin air

Engineers from Australia and China have invented a sponge-like device that captures water from thin air and then releases it in a cup using the sun’s energy, even in low humidity where other technologies such as fog harvesting and radiative cooling have struggled.

Aerial view of a Stockland community in Victoria.

Harnessing data to drive liveability

RMIT is collaborating with government and industry partners on an innovative data sharing project, which aims to create more sustainable, liveable and healthier communities.

image_extended_2.jpg

Gas-sensing capsule takes another big step from lab to commercialisation

An ingestible gas-sensing capsule that provides real-time insights into gut health has moved closer to market with RMIT University transferring IP ownership to medical device company Atmo Biosciences.

Two women and one man in a lab - the middle person is holding a vile of brown liquid..

Aussie tech helps make bio-oils for greener industrial applications

Australian technology developed at RMIT University could enable more sustainable and cheaper production of bio-oils to replace petroleum-based products in electronic, construction and automotive applications.

Show more
aboriginal flag float-start torres strait flag float-start

Acknowledgement of Country

RMIT University acknowledges the people of the Woi wurrung and Boon wurrung language groups of the eastern Kulin Nation on whose unceded lands we conduct the business of the University. RMIT University respectfully acknowledges their Ancestors and Elders, past and present. RMIT also acknowledges the Traditional Custodians and their Ancestors of the lands and waters across Australia where we conduct our business - Artwork 'Sentient' by Hollie Johnson, Gunaikurnai and Monero Ngarigo.

More information